Home
Product Directory
Industrial Equipment & Components
Environment Protection Device
Sewage Treatment Equipment
Product Description
Company Info
Product Description
Water treatment system
Introduction to the system
Water supply treatment composes of water for beverage foods processing, water for electronic medicine and water for industry. The water sources for water supply treatment compose of surface water and under ground water. Surface water is also named as over ground water and refers water in the river, lake and reservoir, and features relatively salt content and hardness, water quality is unstable and has big changes according to the season. Under ground water means the water in deep well which is excavated manually, and features more salt with stable water quality which won't change according to the season.
Introduction to Water treatment system
The technology a set of water treatment system uses depends on water quality and purpose of water use. The adopted technologies can basically be divided into pre-treatment system, depth treatment system and terminal treatment system. Pretreatment system includes media filter, active carbon filter, softener, iron and manganese filter, ultra-filtration, micro-filtration, etc; Advanced treatment includes membrane method treatment and ion exchange; Aftertreatment system includes sterilization and ion exchange, etc.
Pretreatment system
Pretreatment system refers to using mechanical filtration, absorption and coagulation to remove soap grains, colloid, suspended substances, free residual chlorine and organic as much as possible and lowering turbidity, colority, stink and hardness of influent water to guarantee pretreated water meets the requirements of depth salt-removing system.
Advanced treatment system
Ion exchange technology was adopted in depth treatment system in China in early days. Because ion exchange needs acid-alkali reclaiming treatment after a period of use, its reclaiming solution is apt to pollute the environment after it's discharged and the maintenance cost is relatively high. Membrane method treatment matured at technology is more widely employed now. Membrane method treatment includes ultra-filtration, reverse osmosis and ion filtration. Ultra-filtration is generally used in pretreatment instead of depth treatment system. Reverse osmosis primarily removes salt, metal ion and microbe in water to guarantee final effluent water is qualified for the influent water requirements of terminal treatment system.
Terminal treatment system
According to end water, terminal treatment system can be roughly divided into two types: One is preparations of drinking water and the other is preparations of ultrapure water. After treatment system for drinking water mainly uses ozone for sterilization. Ozone is extremely strong oxidant with the function of high-efficiency and sterilization. Meanwhile, the product of ozone reaction is oxygen whose performance is better than that of chlorine ultraviolet ray as a high-efficient oxidant without second pollution. It is exactly this characteristic of ozone that has been widely used in water treatment system extensively during recent decades. Terminal treatment system for ultrapure water mainly uses the most advanced technology of EDI, short for electro-deionization, or mixed resin bed to further remove various kinds of ion in water. EDI utilizes mixed ion exchange resins to absorb anion and cation in supplied water and meanwhile the absorbed ion is affected by direct current voltage to reclaim resins continually in course of operation with the help of removing by anion and cation Mixed resin bed also utilizes anion and cation exchange resins to remove salt in water to a certain degree and then carries on reclaiming with the help of acid and alkali. Utilization-use-preparations means are often needed to keep the system's incessant water effluence.
If you want to know more information, please visit our website and contact us directly.
Introduction to the system
Water supply treatment composes of water for beverage foods processing, water for electronic medicine and water for industry. The water sources for water supply treatment compose of surface water and under ground water. Surface water is also named as over ground water and refers water in the river, lake and reservoir, and features relatively salt content and hardness, water quality is unstable and has big changes according to the season. Under ground water means the water in deep well which is excavated manually, and features more salt with stable water quality which won't change according to the season.
Introduction to Water treatment system
The technology a set of water treatment system uses depends on water quality and purpose of water use. The adopted technologies can basically be divided into pre-treatment system, depth treatment system and terminal treatment system. Pretreatment system includes media filter, active carbon filter, softener, iron and manganese filter, ultra-filtration, micro-filtration, etc; Advanced treatment includes membrane method treatment and ion exchange; Aftertreatment system includes sterilization and ion exchange, etc.
Pretreatment system
Pretreatment system refers to using mechanical filtration, absorption and coagulation to remove soap grains, colloid, suspended substances, free residual chlorine and organic as much as possible and lowering turbidity, colority, stink and hardness of influent water to guarantee pretreated water meets the requirements of depth salt-removing system.
Advanced treatment system
Ion exchange technology was adopted in depth treatment system in China in early days. Because ion exchange needs acid-alkali reclaiming treatment after a period of use, its reclaiming solution is apt to pollute the environment after it's discharged and the maintenance cost is relatively high. Membrane method treatment matured at technology is more widely employed now. Membrane method treatment includes ultra-filtration, reverse osmosis and ion filtration. Ultra-filtration is generally used in pretreatment instead of depth treatment system. Reverse osmosis primarily removes salt, metal ion and microbe in water to guarantee final effluent water is qualified for the influent water requirements of terminal treatment system.
Terminal treatment system
According to end water, terminal treatment system can be roughly divided into two types: One is preparations of drinking water and the other is preparations of ultrapure water. After treatment system for drinking water mainly uses ozone for sterilization. Ozone is extremely strong oxidant with the function of high-efficiency and sterilization. Meanwhile, the product of ozone reaction is oxygen whose performance is better than that of chlorine ultraviolet ray as a high-efficient oxidant without second pollution. It is exactly this characteristic of ozone that has been widely used in water treatment system extensively during recent decades. Terminal treatment system for ultrapure water mainly uses the most advanced technology of EDI, short for electro-deionization, or mixed resin bed to further remove various kinds of ion in water. EDI utilizes mixed ion exchange resins to absorb anion and cation in supplied water and meanwhile the absorbed ion is affected by direct current voltage to reclaim resins continually in course of operation with the help of removing by anion and cation Mixed resin bed also utilizes anion and cation exchange resins to remove salt in water to a certain degree and then carries on reclaiming with the help of acid and alkali. Utilization-use-preparations means are often needed to keep the system's incessant water effluence.
If you want to know more information, please visit our website and contact us directly.
Address:
2002-20F Gold River Center No. 88 Shishan Road, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service
Company Introduction:
Suzhou Sun Field Co., Ltd is located in Suzhou High-Tech Industrial Development Zone, Jiangsu Province. The company was established in 2003.
Suzhou Sun Field Co., Ltd was constituted by two manufactory and a professional international trade company. We specialized in the manufacturing and sales of the various liquid treatment and packing machine. We had engaged in the field of the system integration more than 5 years. We can provide the full-automatic or semi-automatic machine and the full-automatic production line or semi-automatic production line.
At present, the company also specialize in the research and development of non-negative pressure and constant pressure water supply device to further seek the development of company.
Company insists on the business ideas of GOOD FAITH, UNIQUE FEATURE, EFFICIENCY, FLEXIBLE, LOW COST. Company depends on own experience to become the customers′ office in China, satisfy the various requirements of the customers.
Companies insists on the service ideas of Q (QUALITY first), D (timely DELIVERY), C (CUSTOMER first), I (insist on INNOVATION). We sincerely hope to become your sincere friend and a long-term partner.
Welcome to the world-famous ancient city--Suzhou. Welcome to our company.
What can we do
1. We rely on the manufactory to provide the equipments, which can meet the customers′ requirment.
2. We rely on the professional international trade team and the geographical advantage of the company locating in the Chinese economic developed area to provide the single equipment or complete equipment with high quality and competitive price.
3. We rely on own technical to provide the service from the liquid treatment system to the system integration of whole production line. The service includes the proposal design, the machine connection, etc.
4. We provide the service of installation, commissioning and training of the equipments or the production lines. We also provide the consumables and spare parts of the machines.
5. We provide the service of improvement, reforming and rerun of the existing equipments and production line.
6. We provide the service of making non-standard parts according the customers drawing.
7. We also provide the service, which is in the outside of our existing business range for the customers. Such as research, enquiry and etc.
If you want to know more information, please visit our website and contact us directly.
Suzhou Sun Field Co., Ltd was constituted by two manufactory and a professional international trade company. We specialized in the manufacturing and sales of the various liquid treatment and packing machine. We had engaged in the field of the system integration more than 5 years. We can provide the full-automatic or semi-automatic machine and the full-automatic production line or semi-automatic production line.
At present, the company also specialize in the research and development of non-negative pressure and constant pressure water supply device to further seek the development of company.
Company insists on the business ideas of GOOD FAITH, UNIQUE FEATURE, EFFICIENCY, FLEXIBLE, LOW COST. Company depends on own experience to become the customers′ office in China, satisfy the various requirements of the customers.
Companies insists on the service ideas of Q (QUALITY first), D (timely DELIVERY), C (CUSTOMER first), I (insist on INNOVATION). We sincerely hope to become your sincere friend and a long-term partner.
Welcome to the world-famous ancient city--Suzhou. Welcome to our company.
What can we do
1. We rely on the manufactory to provide the equipments, which can meet the customers′ requirment.
2. We rely on the professional international trade team and the geographical advantage of the company locating in the Chinese economic developed area to provide the single equipment or complete equipment with high quality and competitive price.
3. We rely on own technical to provide the service from the liquid treatment system to the system integration of whole production line. The service includes the proposal design, the machine connection, etc.
4. We provide the service of installation, commissioning and training of the equipments or the production lines. We also provide the consumables and spare parts of the machines.
5. We provide the service of improvement, reforming and rerun of the existing equipments and production line.
6. We provide the service of making non-standard parts according the customers drawing.
7. We also provide the service, which is in the outside of our existing business range for the customers. Such as research, enquiry and etc.
If you want to know more information, please visit our website and contact us directly.
